Present visitors
When the hoses are disconnected both the male and the female ends are sealed automatically allowing easy and secure release and connection of side-mounted cylinders and allowing a change of gas supply if required.
GCS100 includes:
1 x GC3 FLOWSTOP
1 x GC1/24 - 24" hose - female snap connector and 1st stage end
1 x GC2/24 - 24" hose - male connector and ADV end
1 x EV50/24 - AA 24" hose - female snap connector & 1st stage end
Suitable Use:
Fit GC1 to the side-mount with the FLOWSTOP in-line. Fit GC2 to the rebreather ADV and the EV50 to the on-board diluent manifold.
This enables you to connect the ADV to the onboard diluent when diving with air diluent or to the off-board side-mount for trimix diluent.
As as alternative, the FLOWSTOP could be fitted onto the ADV - sitting between the ADV and the GC2 hose.
All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length.
The ends can then be screwed back on. NOTE: The crimped 9/16" UNF ends are not reusable.
Longer hoses are available on request.
IMPORTANT NOTE: The APD Gas Connector System (GCS) conforms to the EN250 regulator breathing standard down to 40m. Below this depth the breathing performance falls below this standard. If the GC3 FLOWSTOP is used in-line with the GCS the system conforms to EN250 down to 30m.
CCRspares price - £153.00
CCRspares price - £120.00
When the hoses are disconnected both the male and the female ends are sealed automatically allowing easy and secure release and connection of side-mounted cylinders and allowing a change of gas supply if required.
GCS100A includes:
1 x GC1/24 - 24" hose - female snap connector and 1st stage end
1 x GC2/24 - 24" hose - male connector and ADV end
1 x EV50/24 - AA 24" hose - female snap connector & 1st stage end
Suitable Use:
As GCS100 but without the FLOWSTOP.
Fit GC1 to the side-mount. Fit GC2 to the rebreather ADV and the EV50 to the on-board diluent manifold.
This enables you to connect the ADV to the onboard diluent when diving with air diluent
or to the off-board side-mount for trimix diluent.
All hoses can be shortened by unscrewing the reusable end fittings and cutting the hose to the required length.
The ends can then be screwed back on. NOTE: The crimped 9/16" UNF ends are not reusable.
Longer hoses are available on request.
IMPORTANT NOTE: The APD Gas Connector System (GCS) conforms to the EN250 regulator breathing standard down to 40m. Below this depth the breathing performance falls below this standard. If the GC3 FLOWSTOP is used in-line with the GCS the system conforms to EN250 down to 30m.
Next Page
Previous Page
GCS100 - Complete Kit
GCS100 - Gas Connector System 100
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your ADV or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage.
GCS100A - Complete Kit - minus flowstop
GCS100A - Gas Connector System 100A
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your ADV or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage.
Next Page
Previous Page